Fluid driven percolation
Problem description
Note, this project file runs only with a modified version of OGS which you can find here .
We simulate two different fluid percolation experiments performed on rock salt samples with a true tri-axial loading system as described in this PDF . The experiments were performed under two different stress configurations as below.
Results and evaluation
Simulated crack paths (phase-field) for the two cases are shown below:
Community Discussion
The following comments are pulled in from our Discourse forum and contain community-generated content.
This article was written by Keita Yoshioka. If you are missing something or you find an error please reach out
to us on our forum.
Generated with Hugo 0.164.0
in CI job 825193
|
Last revision: April 20, 2026
Commit: refactor(MeshLib): remove PropertyVector::push_back 870422dde
| Edit this page on