Small deformations: Verification examples by Vogel,Maßmann

These benchmark examples test the implementation of small deformations process with analytical solutions presented by Vogel/Massmann.

A detailed description can be found in the ogs Benchmark books. The following table links the ogs problem descriptions with its corresponding chapters in the benchmark books.

Book/Chapter Benchmark name
Kolditz et al. 2015
2.4.1 m1_1Dload
2.4.3 m1_3Dgravity
Kolditz et al. 2016
4.1.1 m1_1Dlozenge
4.1.2 m1_2Dload
4.1.3 m1_3Dload
Kolditz et al. 2018
3.7 m1_3Dsquare
3.9 m1_3Dbottom
3.10 m1_3Dtopload
3.15 m3_3Dshearz
3.15 (rotated) m3_3Dshearz_rot
3.16 m3_3Dtopload
3.16 (rotated) m3_3Dtoploadlc

Note that OGS uses plane strain assumptions in two dimensions (2D) as it is common in geomechanics.

References

Kolditz, Olaf and Shao, Hua and Wang, Wenqing and Sebastian, Bauer (2015): Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking -- Closed-Form Solutions. ISBN: 978-3-319-11893-2, Springer International Publishing, DOI:10.1007/978-3-319-11894-9

Kolditz, Olaf and Görke, Uwe-Jenks and Shao, Hua and Wang, Wenqing and Sebastian, Bauer (2016): Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking -- Benchmarking Initiatives. ISBN: 978-3-319-29223-6, Springer International Publishing, DOI:10.1007/978-3-319-29224-3

Kolditz, Olaf and Nagel, Thomas and Shao, Hua and Wang, Wenqing and Sebastian, Bauer (2018): Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking -- From Benchmarking to Tutoring. ISBN: 978-3-319-68224-2, Springer International Publishing, DOI:10.1007/978-3-319-68225-9


This article was written by Johannes Herfurth, Jan Thiedau. If you are missing something or you find an error please let us know. Generated with Hugo 0.96.0. Last revision: February 16, 2022
Commit: explanation stress concentration and running model 5c94789  | Edit this page on